ADC
Add With Carry
| Opcode | Instruction | Op/En | 64-bit Mode | Compat/Leg Mode | Description |
|---|---|---|---|---|---|
| 14 ib | ADC AL, imm8 | I | Valid | Valid | Add with carry imm8 to AL. |
| 15 iw | ADC AX, imm16 | I | Valid | Valid | Add with carry imm16 to AX. |
| 15 id | ADC EAX, imm32 | I | Valid | Valid | Add with carry imm32 to EAX. |
| REX.W + 15 id | ADC RAX, imm32 | I | Valid | N.E. | Add with carry imm32 sign extended to 64-bits to RAX. |
| 80 /2 ib | ADC r/m8, imm8 | MI | Valid | Valid | Add with carry imm8 to r/m8. |
| REX + 80 /2 ib | ADC r/m8*, imm8 | MI | Valid | N.E. | Add with carry imm8 to r/m8. |
| 81 /2 iw | ADC r/m16, imm16 | MI | Valid | Valid | Add with carry imm16 to r/m16. |
| 81 /2 id | ADC r/m32, imm32 | MI | Valid | Valid | Add with CF imm32 to r/m32. |
| REX.W + 81 /2 id | ADC r/m64, imm32 | MI | Valid | N.E. | Add with CF imm32 sign extended to 64-bits to r/m64. |
| 83 /2 ib | ADC r/m16, imm8 | MI | Valid | Valid | Add with CF sign-extended imm8 to r/m16. |
| 83 /2 ib | ADC r/m32, imm8 | MI | Valid | Valid | Add with CF sign-extended imm8 into r/m32. |
| REX.W + 83 /2 ib | ADC r/m64, imm8 | MI | Valid | N.E. | Add with CF sign-extended imm8 into r/m64. |
| 10 /r | ADC r/m8, r8 | MR | Valid | Valid | Add with carry byte register to r/m8. |
| REX + 10 /r | ADC r/m8*, r8* | MR | Valid | N.E. | Add with carry byte register to r/m64. |
| 11 /r | ADC r/m16, r16 | MR | Valid | Valid | Add with carry r16 to r/m16. |
| 11 /r | ADC r/m32, r32 | MR | Valid | Valid | Add with CF r32 to r/m32. |
| REX.W + 11 /r | ADC r/m64, r64 | MR | Valid | N.E. | Add with CF r64 to r/m64. |
| 12 /r | ADC r8, r/m8 | RM | Valid | Valid | Add with carry r/m8 to byte register. |
| REX + 12 /r | ADC r8*, r/m8* | RM | Valid | N.E. | Add with carry r/m64 to byte register. |
| 13 /r | ADC r16, r/m16 | RM | Valid | Valid | Add with carry r/m16 to r16. |
| 13 /r | ADC r32, r/m32 | RM | Valid | Valid | Add with CF r/m32 to r32. |
| REX.W + 13 /r | ADC r64, r/m64 | RM | Valid | N.E. | Add with CF r/m64 to r64. |
*In 64-bit mode, r/m8 can not be encoded to access the following byte registers if a REX prefix is used: AH, BH, CH, DH.
Instruction Operand Encoding
| Op/En | Operand 1 | Operand 2 | Operand 3 | Operand 4 |
|---|---|---|---|---|
| RM | ModRM:reg (r, w) | ModRM:r/m (r) | N/A | N/A |
| MR | ModRM:r/m (r, w) | ModRM:reg (r) | N/A | N/A |
| MI | ModRM:r/m (r, w) | imm8/16/32 | N/A | N/A |
| I | AL/AX/EAX/RAX | imm8/16/32 | N/A | N/A |
Description
Adds the destination operand (first operand), the source operand (second operand), and the carry (CF) flag and stores the result in the destination operand. The destination operand can be a register or a memory location; the source operand can be an immediate, a register, or a memory location. (However, two memory operands cannot be used in one instruction.) The state of the CF flag represents a carry from a previous addition. When an immediate value is used as an operand, it is sign-extended to the length of the destination operand format.
The ADC instruction does not distinguish between signed or unsigned operands. Instead, the processor evaluates the result for both data types and sets the OF and CF flags to indicate a carry in the signed or unsigned result, respectively. The SF flag indicates the sign of the signed result.
The ADC instruction is usually executed as part of a multibyte or multiword addition in which an ADD instruction is followed by an ADC instruction.
This instruction can be used with a LOCK prefix to allow the instruction to be executed atomically.
In 64-bit mode, the instruction’s default operation size is 32 bits. Using a REX prefix in the form of REX.R permits access to additional registers (R8-R15). Using a REX prefix in the form of REX.W promotes operation to 64 bits. See the summary chart at the beginning of this section for encoding data and limits.
Operation
DEST := DEST + SRC + CF;
Intel C/C++ Compiler Intrinsic Equivalent
ADC extern unsigned char _addcarry_u8(unsigned char c_in, unsigned char src1, unsigned char src2, unsigned char *sum_out);
ADC extern unsigned char _addcarry_u16(unsigned char c_in, unsigned short src1, unsigned short src2, unsigned short *sum_out);
ADC extern unsigned char _addcarry_u32(unsigned char c_in, unsigned int src1, unsigned char int, unsigned int *sum_out);
ADC extern unsigned char _addcarry_u64(unsigned char c_in, unsigned __int64 src1, unsigned __int64 src2, unsigned __int64 *sum_out);
Flags Affected
The OF, SF, ZF, AF, CF, and PF flags are set according to the result.
Protected Mode Exceptions
| #GP(0) | If the destination is located in a non-writable segment. |
|---|---|
| If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. | |
| If the DS, ES, FS, or GS register is used to access memory and it contains a NULL segment selector. | |
| #SS(0) | If a memory operand effective address is outside the SS segment limit. |
| #PF(fault-code) | If a page fault occurs. |
| #AC(0) | If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3. |
| #UD | If the LOCK prefix is used but the destination is not a memory operand. |
Real-Address Mode Exceptions
| #GP | If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. |
|---|---|
| #SS | If a memory operand effective address is outside the SS segment limit. |
| #UD | If the LOCK prefix is used but the destination is not a memory operand. |
Virtual-8086 Mode Exceptions
| #GP(0) | If a memory operand effective address is outside the CS, DS, ES, FS, or GS segment limit. |
|---|---|
| #SS(0) | If a memory operand effective address is outside the SS segment limit. |
| #PF(fault-code) | If a page fault occurs. |
| #AC(0) | If alignment checking is enabled and an unaligned memory reference is made. |
| #UD | If the LOCK prefix is used but the destination is not a memory operand. |
Compatibility Mode Exceptions
Same exceptions as in protected mode.
64-Bit Mode Exceptions
| #SS(0) | If a memory address referencing the SS segment is in a non-canonical form. |
|---|---|
| #GP(0) | If the memory address is in a non-canonical form. |
| #PF(fault-code) | If a page fault occurs. |
| #AC(0) | If alignment checking is enabled and an unaligned memory reference is made while the current privilege level is 3. |
| #UD | If the LOCK prefix is used but the destination is not a memory operand. |
This UNOFFICIAL, mechanically-separated, non-verified reference is provided for convenience, but it may be incomplete or broken in various obvious or non-obvious ways. Refer to Intel® 64 and IA-32 Architectures Software Developer’s Manual for anything serious.